The preLink V3 LIMS pre analytical (data capture) and barcode labeling procedures must be done in the following order.
Upon receiving new samples:
Step 1.
Print X-Sample and Request Form barcode labels for each of the sample containers/packages using the Print Station app. (See Printing Barcodes)
Step 2.
Place X-Sample barcode labels on each of the containers/packages. (See Correct Labeling)
Note: Used for high volume management/record-keeping purposes.
Step 3.
Place the 'Request form' label on the top right-hand corner of the request forms. (See Correct Labeling)
Step 4.
Scan the request forms with preLink Image Station. (See Image Station - Scanning Request forms)
Step 5.
Capture the information on the request forms. (See Data Capture)
Note: The Print Station app must be open during data capture in order to automatically print the sample barcodes once capturing is complete.
Step 6.
Place the automatically printed barcode labels on the samples. (See Correct Labeling)
Note: If the barcode labels do not print automatically, or need to be reprinted, click here to view the article on how to manually print the sample barcodes.